HEAT PRESS INSTRUCTIONS

Follow these simple steps to get started
Press Setting
1

Press Setting

Set press temperature to 300°F / 150°C and timer for 20 seconds. When the press reaches temperature place shirt straight on the bottom plate.
Position Your Design
2

Position Your Design

Take your time to line up your transfer in the desired location on your shirt.
Press Design
3

Press Design

Press your transfer with medium to high pressure (6-8 range) at 300°F / 150°C for 20 seconds.
Peel Cold
4

Peel Cold

Allow transfer to cool (about 25 -30 seconds) and gently lift the transfer from one corner and peel back. If any part of your design sticks, stop peeling, lay it back down, and press again with increased pressure and time (+5-10 seconds). If issues persist, adjust temperature in 10°F increments until optimal results are achieved.
Final Press
5

Final Press

Place a non-stick sheet or parchment paper over the design and press again for 5 seconds to seal and soften the design.